Synthesis,Characterization and Application of Co–MgO Mixed Oxides in Oxidation of Carbon Monoxide

The present work deals with the synthesis of nanostructured Co–MgO mixed oxides with different weight ratios of cobalt by a facile co-precipitation method as a catalyst for low-temperature CO oxidation. The prepared samples were characterized by X-ray diffraction (XRD), N₂ adsorption/desorption (BET), Fourier transform infrared spectroscopy (FTIR), and transmission and scanning electron microscopies (TEM and SEM) techniques. The results revealed that inexpensive cobalt–magnesium mixed metal oxide nanoparticles have a high potential as catalyst in low-temperature CO oxidation. The Co–MgO mixed oxide with 30 wt.% cobalt had the highest activity. The results showed that the catalysts pretreated under O₂-containing atmosphere possessed higher activity compared to the catalyst pretreated under H₂ atmosphere. Co–MgO catalyst showed a good repeatability in reaction condition. The stability test exhibited that the Co–MgO mixed oxides were highly stable for CO oxidation over a 30 h time on stream in the feed gas containing a high amount of moisture and CO₂.     

Facility Management Value-Adding Functional Analysis Model

Project management functions in facility management groups include design, construction, and renovation of facilities. The organizational structure and processes of such project management group affect the cost, quality, and duration of any project. The group's functions directly add to the overhead of the parent organization and therefore only value-adding functions are needed. The focus of this paper is to describe a value-adding functional analysis model and its application to develop a strategic direction for a parent organization. The paper presents the foundation for the analysis model, describes its application process to define and support the value-adding functions, and concludes with recommendations for organizational improvement strategy. The paper shows that value-adding functions are usually related to working closely with customer needs while considering the parent organization's requirements in project planning and control. In addition, it was found that any form of closed-market reliance on the internal resources in design and construction constrained the various processes and induced a high level of process uncertainty, which reflected negatively on project delivery time and cost.     

Role of interleukin-5 and substance P in development of airway hyperreactivity to histamine in guinea-pigs

In this study, we examined the mechanism by which bronchoalveolar lavage (BAL) cells induced hyperreactivity of the trachea in vitro. As both interleukin-5 (IL-5) and substance P (SP) appeared to be involved, the effect of these mediators was examined in vivo. Tracheae were incubated with BAL cells from ovalbumin or saline challenged animals, and from naive animals, in the absence or presence of either IL-5, SP, or both. In addition, the effect of intra-airway application of IL-5, SP, both, or vehicle on tracheal hyperreactivity was examined. Incubation of tracheae with BAL cells from ovalbumin challenged animals induced an increase (30 +/- 10%) in the maximal response to histamine. The hyperreactivity could be completely inhibited by co-incubation with 5-lipoxygenase inhibitor, AA861. The hyperreactivity could be mimicked by incubation of tracheae with BAL cells from naive animals in the presence of IL-5 and SP. After in vivo administration of either IL-5 or SP, maximal responses to histamine were increased and amounted to 105 +/- 35 and 101 +/- 37%, respectively. Administration of IL-5 but not SP induced a significant increase in the number of eosinophils (67 +/- 22%) and eosinophil peroxidase (EPO) activity (94 +/- 33%) in BAL cells. The simultaneous administration of IL-5 and SP did not potentiate the hyperreactivity and eosinophilia observed with IL-5 alone. These data suggest that IL-5 is important in the recruitment of eosinophils, whereas both IL-5 and substance P are involved in the induction of airway hyperreactivity.     

An overview of scheduling algorithms in wireless multimedia networks

Scheduling algorithms are important components in the provision of guaranteed quality of service parameters such as delay, delay jitter, packet loss rate, or throughput. The design of scheduling algorithms for mobile communication networks is especially challenging given the highly variable link error rates and capacities, and the. changing mobile station connectivity typically encountered in such networks. This article provides a survey of scheduling techniques for several types of wireless networks. Some of the challenges in designing such schedulers are first discussed. Desirable features and classifications of schedulers are then reviewed. This is followed by a discussion of several, scheduling algorithms which have been proposed for TDMA, CDMA, and multihop packet networks.     

Ultrasonic investigation of some rubber blends

Compression ultrasonic velocity, longitudinal ultrasonic absorption, and heat of mixing for NR-BR, NR, NBR, and NR-IIR rubber blends were measured. Results show the applicability of examining the compatibility degree by using longitudinal ultrasonic absorption techniques. Results showed that NR-BR blends are compatible, whereas NR-NBR and NR-IIR blends are semicompatible and incompatible, respectively.     

A counterexample to an algorithm for computing monotone hulls of simple polygons

A two-stage algorithm was recently proposed by Sklansky (1982) for computing the convex hull of a simple polygon P. The first step is intended to compute a simple polygon $\text{P}{}^1$ which is monotonic in both the x and y directions and which contains the convex hull vertices of P. The second step applies a very simple convex hull algorithm on $\text{P}{}^1$. In this note we show that the first step does not always work correctly and can even yield non-simple polygons, invalidating the use of the second step. It is also shown that the first step can discard convex hull vertices thus invalidating the use of any convex hull algorithm in the second step.     

Curve/surface representation and evolution using vector level sets with application to the shape-based segmentation problem

In this paper, we revisit the implicit front representation and evolution using the vector level set function (VLSF) proposed in (H. E. Abd El Munim, et al., Oct. 2005). Unlike conventional scalar level sets, this function is designed to have a vector form. The distance from any point to the nearest point on the front has components (projections) in the coordinate directions included in the vector function. This kind of representation is used to evolve closed planar curves and 3D surfaces as well. Maintaining the VLSF property as the distance projections through evolution will be considered together with a detailed derivation of the vector partial differential equation (PDE) for such evolution. A shape-based segmentation framework will be demonstrated as an application of the given implicit representation. The proposed level set function system will be used to represent shapes to give a dissimilarity measure in a variational object registration process. This kind of formulation permits us to better control the process of shape registration, which is an important part in the shape-based segmentation framework. The method depends on a set of training shapes used to build a parametric shape model. The color is taken into consideration besides the shape prior information. The shape model is fitted to the image volume by registration through an energy minimization problem. The approach overcomes the conventional methods problems like point correspondences and weighing coefficients tuning of the evolution (PDEs). It is also suitable for multidimensional data and computationally efficient. Results in 2D and 3D of real and synthetic data will demonstrate the efficiency of the framework     

Effect of Nitrogen and Niobium on the Structure and Secondary Hardening of Super Hard High Speed Tool Steel

High‐speed steels have been used mostly for multi‐point cutting tools and for plastic working tools. High speed steels are ferrous based alloys of the Fe‐C‐X multi‐component system where X represents a group of alloying elements comprising mainly Cr, W or Mo, V, and Co. The properties of these steels can be improved by modifying their chemical composition or the technology of their production. One of the new trends in modifying the tool steels chemical composition consists in the addition of niobium and nitrogen. In this work, the effects of niobium and nitrogen on morphology of carbides and secondary hardening temperature of investigated high speed tool steels were studied. This experimental work shows that, the conventional ingots have many types of carbides of different shapes and sizes precipitate on the boundary together with thick needle like carbides. On the contrary, for nitrogen steel, the nitrogen alloying leads to form dense, fine and well distributed microstructure. While, on the case of niobium alloying, single carbide (MC), and different types of eutectic carbides were precipitated which have a major effect on the secondary hardening temperature.